Robot hands range from orderable research end effectors to dexterous systems available only as part of a humanoid robot. This comparison keeps those buying formats separate and shows source-verified degrees of freedom, actuation, tactile or force sensing, weight, grip metrics, pricing and verification dates. Use the filters to find hands you can buy separately, integrated hands and open research platforms without treating incomplete manufacturer claims as equivalent data.
18 robot hands compared · 14 with documented tactile or force sensing · 14 with a standalone buying route
Compare manufacturer-published figures without collapsing actuated and passive joints into one number. Grip values keep their original metric, because fingertip force, holding force and payload are not interchangeable.
Showing 18 of 18 hands
Figure AI
1X Technologies
Inspire Robotics
Seed Robotics
ORCA Dexterity, Inc.
Carnegie Mellon University
Wonik Robotics
Wonik Robotics
qb robotics
SCHUNK
Tesollo
DexRobot
Shadow Robot
Shadow Robot
Unitree Robotics
Unitree Robotics
mimic robotics
A parallel or adaptive gripper is usually the better production tool when the object set, grasp direction and cycle are predictable. A multi-finger robot hand earns its extra cost and control burden when the job needs in-hand reorientation, tool use, varied object geometry or human-compatible contact. Define the required grasps and failure tolerance before using finger count or human likeness as a shortcut for capability.
Manufacturers count degrees of freedom in different ways. Total DoF can include coupled, passive or wrist joints; actuated DoF counts independently driven motion. A hand with more stated joints is not necessarily more controllable. RoboZaps keeps actuated and total DoF in separate fields, preserves the maker's counting basis on the product record and marks the value unpublished when a source does not make the distinction.
Tendon and cable drives can move motors out of the fingers and support compliant, human-like packaging, but cables stretch and may need tensioning. Direct-drive and geared joints can simplify control and deliver stiffness, while adding distal mass and potential backlash. Pneumatic and soft actuators favour safe contact and compliance but need different infrastructure. Compare actuation architecture with service access, replacement parts and expected duty cycle—not as a standalone ranking.
A contact switch, a motor-current estimate, normal-force taxels and three-axis fingertip sensing provide very different feedback. Ask which surfaces are instrumented, whether the signal measures contact, normal force or shear, the spatial resolution and sampling rate, and whether raw data is exposed through the SDK. The table reports only the sensing mode a source actually documents; a tactile marketing claim without a public measurement stays qualified on the product page.
Vendors publish fingertip force, pinch force, holding force, cylindrical grasp capacity or payload—sometimes as a peak and sometimes as a continuous rating. Those are different tests. RoboZaps preserves the original metric and unit instead of converting them into a misleading strongest-hand leaderboard. For a real shortlist, request the test pose, object geometry, friction material, duration and safety factor behind the number.
Mounting interface, side and wrist orientation, hand mass, centre of gravity, cable routing, power, communications and controller frequency all affect whether a hand works on an arm. Then inspect the software layer: ROS support, low-level command access, simulation models, calibration tooling, example grasps and licence terms. A nominally compatible flange does not make the controls, payload budget or safety case compatible.
Some robot hands can be ordered as complete hardware, some are quote-only research products, some publish open designs that still require assembly, and many headline-grabbing hands are not sold separately from their humanoid. The buying-format field makes that boundary explicit. A whole-robot announcement, preorder or price is never presented as the price or availability of its hand.
Ask for the exact left/right configuration, controller and sensor package included in the quote; continuous and peak force limits; expected cable, skin or fingertip life; replacement procedures; supported communication stack; calibration requirements; warranty exclusions; lead time; export restrictions; and a task-relevant demo using representative objects. Budget for mounting, power, controls integration, spare wear parts and engineering time as well as the hand.
This directory is built as an evidence trail, not a one-number ranking. Product pages retain the source and checked date behind each public specification so readers can audit a claim in context.
Figure AI
The redesigned hand system of Figure's third-generation humanoid, Figure 03, purpose-built for the Helix vision-language-action AI. It ships only as part of the Figure 03 robot and is not sold separately.
1X Technologies
The hands of 1X's NEO humanoid: 25 degrees of freedom (22 in the fingers and palm plus 3 at the wrist), tendon-driven and force-controlled, with tactile sensing across fingertips and surfaces. They ship only as part of NEO.
PSYONIC
PSYONIC's Ability Hand is a 490 g multi-articulated bionic hand, originally a prosthesis, that PSYONIC also sells to robotics research users with full API access.
Inspire Robotics
The RH56DFX is Inspire Robots' humanoid five-finger dexterous hand with 6 degrees of freedom across 12 joints, driven by force-controlled micro linear servo actuators. It integrates force sensing with 0.5 N resolution and is aimed at robot end effectors and prosthetics.
Seed Robotics
The RH8D is Seed Robotics' adult-size dexterous robot hand with 19 degrees of freedom driven by 8 smart actuators contained inside the unit. Its underactuated design conforms to object shapes, and it offers rich per-joint sensing with optional FTS tactile pressure sensors.
ORCA Dexterity, Inc.
The ORCA Hand is an open-source, tendon-driven anthropomorphic robotic hand that originated in the Soft Robotics Lab at ETH Zurich and is sold by ORCA Dexterity, Inc. Fully assembled hands ship with Feetech or Dynamixel actuators, and the Touch variant adds 351 tactile taxels across all five digits.
From $3,500Listed price
Carnegie Mellon University
LEAP Hand is a low-cost, anthropomorphic four-finger robot hand for machine-learning research, presented at RSS 2023 by Carnegie Mellon University researchers. It is fully open source, with CAD, URDF, simulation environments, and APIs released, and assembles from off-the-shelf parts for under $2,000.